This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Converting a 20mm Hub to Standard QR
#1
Is this possible? I have a 20mm hub on my front wheel but may want to convert it to run standard quick release.

It is the Ritchey hub that came with my Boardman FS Team.
Reply
#2
There is no valid reason to go back to a small bendy axle but if you must then it depends on the hub. Some ie Hope's you can change the end caps for different ones, no idea if your Ritchey ones can. I suggest you find out their exact model number which is probably on them somewhere then find Ritcheys home page in Google and take a browse.
Reply
#3
"Breezer" Wrote:There is no valid reason to go back to a small bendy axle but if you must then it depends on the hub. Some ie Hope's you can change the end caps for different ones, no idea if your Ritchey ones can. I suggest you find out their exact model number which is probably on them somewhere then find Ritcheys home page in Google and take a browse.

Cheers Breezer. i completely agree but i'm thinking of putting the wheel on a different bike which has a fork with a standard qr. The hubs have no model information on them so i might have to do some digging.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)