This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wanted, cranks + chain rings- any condition
#1
Hi,

Maybe similar to somebody else's previous post, does anyone have any cranks and / or chain rings? Condition is not important, cranks to have normal square taper, nothing exciting.

Thanks guys
Keep it foolish...
Reply
#2
Are they to go on a bike ?

I have the set of the vulcan still ... They need a clean but the the NDS crank has had all its threads almost ripped out !
Reply
#3
could still be worth a try if it's ok with you? See you on sunday?
Keep it foolish...
Reply
#4
"alkali" Wrote:could still be worth a try if it's ok with you? See you on sunday?

Hopefully so providing weather is alright !

Right so ive got cranks for mike and andy .. plus brakes for andy and ben  :o Big Grin
Reply
#5
sweet dude
Keep it foolish...
Reply
#6
"TooYoungToKnow" Wrote:Hopefully so providing weather is alright !

Right so ive got cranks for mike and andy .. plus brakes for andy and ben  :o Big Grin

Sunday is turning into a swap meet...im bringing cranks, bars and a stem!

Ive got a large Merlin Malt 1 frame too if anybody is interested...
Reply
#7
Ive got some frayed cable inners
Reply
#8
"Blackers" Wrote:Sunday is turning into a swap meet...im bringing cranks, bars and a stem!

Ive got a large Merlin Malt 1 frame too if anybody is interested...

How much do you want for the frame?
Reply
#9
"leadbasher" Wrote:How much do you want for the frame?

Ten Quid would probably be about right. Its a 2002 so has older geometry but its set up for a 100mm fork. Ill see if I can get to the shed and whack a pic up later...
Reply
#10
"Blackers" Wrote:Ten Quid would probably be about right. Its a 2002 so has older geometry but its set up for a 100mm fork. Ill see if I can get to the shed and whack a pic up later...
Remember to take plenty of supplies and a spade ... and only travel the distance if its an important journey Wink
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)