This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Chainring compatibility
After the Wales trip I need to treat my crank to a new middle and inner ring.  I'd brought a Deore inner while there but found out it does not fit an external BB so was going to get another XT or SLX as a replacement.  In an attempt to keep costs down I was looking at one of THESE to use for the middle and just wanted to check it would fit ok?
Ride the Spiral to the end
It takes us to where no ones been
What chainset have you got? If it's an M770 then the one you linked to will fit, but if it's the newer M772 then that isn't compatible, as the tabs are different, and if so you might be limited to XT M772s. Not sure if Middleburn have made any that fit yet.
Its an M770 so thats all good, cheap and cheerful wins the day Smile
Ride the Spiral to the end
It takes us to where no ones been
Can you not just cut and file the excess off the deore ring? Save a bunch of ££

Forum Jump:

Users browsing this thread: 1 Guest(s)