This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3x10 to 1x11
#1
Looking at converting an XT 3x10 to run 1x11 with the new Xo1 rear cassette. Looks like I just remove the granny completely and forget about that. Then remove the big ring replacing the middle ring with my new narrow wide ring and use shorter bolts. Is this right? If so can anyone advise as to where I would get hold of some of these bolts? Had a quick look and can't seem to find anything, but maybe I'm looking for the wrong thing... Cheers
Reply
#2
They are called single chainring bolts.  ;D
Not sure if all hubs take new 11speed rear cassette
Reply
#3
Haha cheers, obvious really I suppose. I believe Hope do a replacement freehub for sram xx1/xo1 now. I will be running hope hubs
Reply
#4
"MobileBikeClinic" Wrote:They are called single chainring bolts.  ;D
Not sure if all hubs take new 11speed rear cassette

11 speed need an 11sp specific hub, as 11th is a 10 tooth and won't fit on existing hubs.
Reply
#5
"Treehugger" Wrote:11 speed need an 11sp specific hub, as 11th is a 10 tooth and won't fit on existing hubs.

XD drive hub.

If you're getting a new wheel build it should be a standard option so you don't have to pay extra for the adaptor/new body
Reply
#6
"BennyP" Wrote:XD drive hub.

If you're getting a new wheel build it should be a standard option so you don't have to pay extra for the adaptor/new body

Yes hope hoops have the xd as an option now
Reply
#7
"matt07" Wrote:Yes hope hoops have the xd as an option now

I can confirm that it is no where near as noisy too!!

Smile
Reply
#8
Undecided I quite liked the clicky noise though!
Reply
#9
Anyone know if there are plans for an 11sp freehub for Pro 2?
Reply
#10
Presume pro 2 EVO is different?
<!-- m --><a class="postlink" href="http://www.chainreactioncycles.com/mobile/hope-pro-2-evo-freehub-body-sram-xx1-xd-qr/rp-prod106608?utm_source=Google&utm_medium=Shopping&utm_name=UnitedKingdom&gclid=CMusv-qZ2bwCFRDLtAodVywAgA&gclsrc=aw.ds">http://www.chainreactioncycles.com/mobi ... lsrc=aw.ds</a><!-- m -->
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)